Honeywell Ademco WI-FI Repeater Extender WREX
Honeywell’s WREX (Wi-Fi Repeater Extender) is designed to enhance connectivity within a wireless Wi-Fi network, letting dealers expand the number of locations where they can install IP cameras. Configuration is easy with a push-button WPS (Wi-Fi Protected Setup) and available wired Ethernet connection. Wi-Fi signal strength bars and diagnostic screens help installers diagnose range issues.
Supports 802.11b/g/n Wireless Standards
The WREX is compatible with the most popular wireless standards. 802.11n, 802.11g and 802.11b wireless devices can be used simultaneously.
Bridge Mode for Wired Clients
Connect a wired IP device to the Ethernet port to convert it to wireless.
WPS (Wi-Fi Protected Setup) simplifies the process of connecting devices to the wireless networks by using the push button configuration on the device.
LAN Port – 1 (10/100 Mbit/sec port)
Wi-Fi – IEEE 802.11b/g/n
Support Standard –
IEEE 802.3, IEEE 802.3u, 10/100 Base-TX, Auto Negotiation, Auto-MDIX Wireless
Wireless Security – WPS push-button configuration
Antenna Power– 1.8 dBi
Antenna Type – External Detachable x 2
PA RF Power –About + 20 dBm (Low Data Rates)/ +18 dBm (High Data Rates)
LED Indicators – Power, WPS, Wi-Fi uplink, Wi-Fi client connected, Ethernet
Push Button – Power, WPS, Reset
Dimensions (H x W x D) – 67mm x 40mm x 86.5mm
Compliance – FCC, UL
Input – 100 ~ 240 VAC (Built-in Power)
Operation – Temperature: 0°-50°C (32°-122°F); Humidity: 8%-95% RH (non-condensing)
Storage – Temperature: -20°-85°C (-4°-158°F); Humidity: 5%-95% RH (non-condensing)